  
Adobe Reader is needed to view and print PDF files. Download Now 
|
Metal Cutting Saws: 16" Fully Automatic Cutoff SawComplete with 7.5 or 10 HP TEFC motor, magnetic starter with 110 volt at the pushbuttons, fully automatic bar feed and air operated vise, Stock Roller Guides, Hardened Wear Pads, Port Speed Control Mufflers. Capacity: Aluminum 2" solids—3" x 4" Extrusions Steel 0.25" solids—1.5" tubing or shapes
• Fully Automatic Bar Feed: Custom air feed is entirely pneumatic and operates as smoothly and quietly as possible—easy feed length adjustment. • Low Maintenance: Due to fewer moving parts; standard off the shelf hardware used wherever possible. • Feed Block: Slides on hardened and ground rods with linear ball bearings. • Cool Running: 10 GPM coolant system: 21 gallon reservoir • High Speed: High production cutting up to 2000 cycles/hr cutting 1/2 x 1/2 x 1/2 aluminum • Hydraulic Shock Absorber: For higher feed rates and long life • Flexible: Cuts most material–aluminum, copper, brass, plastic and small sizes of mild steel, tool steel and stainless steel • Cut Most Shapes: From extrusions to die pins and punches, interchangeable steel blades and abrasive wheels Specifications Blade Diameter: 12", 14", 16" Motor: 7 1/2 HP 230/460 volt 3 phase 60 Hz. Starter: Magnetic starter; 110 volt at the pushbuttons Spindle Diameter: 1" Flange Diameter: 5" For Extra Blade Stability Bar Feed Stroke: 1/2" - 12" standard, others available Air Vise Opening: 4", Back Fence 3" High, moveable jaw 2 1/2" High Optional Accessories • Bar End Stop • Multi-Stroke Counter • Batch Counter • 10 HP Motor Call for pricing and availability 1-800-637-7297
Home |
Dry Abrasive Cutting |
Wet Abrasive Cutting |
Abrasive Wheels |
Abrasive Saws |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
